(Press Release, July 2008)
Research Project PYROTAK
Competition and pressure to keep costs low are no strangers to modern aircraft manufacture, especially against the backdrop of the weak US dollar. Nevertheless safety and technical reliability are still top priority. Requirements for efficiency and environmental considerations for wide-bodied aircraft demand research and innovation from every conceivable field. A Bavarian scientific and industrial consortium is breaking the mold in the design of aircraft doors and emergency opening systems.
Weight minimization is a particular challenge in the design of jets.
Aircraft doors are a critical factor in this weight balance. The classified, safety-sensitive emergency opening systems are an area where highly specific weights and costs are demanded.
This is where the ambitious research project PYROTAK comes in. It is a collaboration of research projects from Bavarian businesses and universities which have proven to be a success. The participating businesses and universities under the direction of consortium leader Eurocopter Deutschland GmbH, Donauwörth are developing a new door actuator which in an emergency opens the doors of wide-bodied aircraft. Additionally this innovative concept provides the potential to upgrade existent fleets of aircraft.
It is also possible to apply this to broader uses within the field of actuators which have a similar application profile in the air industry, such as emergency opening systems for aircraft passenger doors. Positive consequences for the Bavarian economic region are expected not only in terms of development and manufacture of emergency opening-systems, but also for the whole field of the aerospace industry.
The research project PYROTAK, which comprises a volume of 2 million euros, should be completed by the end of 2010. The Bavarian Research Foundation funds 50% of the project. Through this research and testing of the innovative emergency opening system for passenger doors, a strengthening of Bavaria as an aviation region is expected. This will also further the creation and security of new jobs at the participating companies.
This is the project basis: Currently, the known procedures for emergency openings of aircraft passenger doors, electronic or pneumatic, are not the best options in terms of weight, maintenance expense, complexity of the electronics and the energy density.
Pyrotechnic propellants have not yet been developed sufficiently in aeronautics; the full economic potential of this drive option has been so far unused. The aim of PYROTAK is the development of a pyrotechnic rotary drive system for the opening of passenger doors when in an emergency the doors must be relied on to open automatically.
The introduction of totally innovative technology such as pyrotechnics for rotary actuators requires an extraordinary amount of cooperation between science, research and industry The company Eurocopter Deutschland GmbH, Donauwörth is a leading manufacturer of doors and cargo doors for commercial aircraft, especially for Airbus. On board for the development of the pyrotechnic door actuator are various prestigious universities and companies.
The development of pyrotechnic propellant is the responsibility of the company HS Product Engineering in Alling. A particular challenge is to gain insights into the use of pyrotechnics for slow operating systems.
Further scientific assistance for the project comes in the form of Prof. Johann Höcherl (Validation) and Prof. Dr. rer. nat. Michael Pfitzner (Thermodynamics), both from the University of German Federal Armed Forces in Neubiberg.
Prof. Dr.-Eng. Bernhard Frenzel and Prof. Dr. Peter Kurzweil, both from the University for Applied Sciences Amberg-Weiden are responsible for the conception and design of the ignition device. The pyrotechnic propulsion unit, which is activated by the ignition device, supplies the motor with the necessary working gas. The rotating actuator drives the aircraft doors.
There are two different drive concepts in the collaboration research project: a direct gas motor and an indirect gas motor which is equipped with an additional reduction gear.
The flow mechanical design of the gas motor is undertaken by Prof. Dr. Eng. Andreas P. Weiß of the University for Applied Sciences Amberg-Weiden.
The concept of the direct gas motor is to be devised by the engineers of the Bavarian company HS Product Engineering.
The pyrotechnic ignition indirect motor with reduction gears is however created in the development laboratory of DEPRAG SCHULZ GMBH & CO. For over 75 years the Amberg company has been producing a wide variety of pneumatic tools. The central element to this tool is the air motor as drive unit. Depending on application an air vane motor, tooth wheel motor or turbine drive can be used.
For the research project the turbine drive is most suitable as this has the highest power density and allows oil free operation.
For the research project the turbine drive is most suitable as this has the highest power density and allows oil free operation. Up to four kilowatts capacity can be realized by a machine which weighs less than two kilograms. DEPRAG turbines are used for example in handheld pneumatic grinders.
These characteristics - low weight and high performance - make the DEPRAG turbines of highly compatible for use in the PYROTAK emergency door system. The engineers at DEPRAG are now pulling out all the stops to develop this ambitious project, a pyrotechnic ignited gas motor with reduction gears which should deploy its torque directly on the door opening drive.
Last but not least the Bavarian company ELEKTRO-METALL from Ingolstadt has taken over the constructive integration of the actuator unit.
With the low maintenance needs, reliability and reduced weight of this emergency opening system PYROTAK, the research consortium sees the chance to take the leading role in this expanding market. In the future aircraft manufacturers will improve their cost position further and further by trusting complicated systems to their trusted expert systems suppliers. So it is to be expected that already at the time of bidding, the doors monitoring and emergency slide will become part of a "complete package". With these visionary technologies such as PYROTAK not only Eurocopter Deutschland GmbH but also the other participating companies can look forward to security and growth.
DEPRAG SCHULZ GMBH & CO., headquartered in Amberg, Bavaria, is represented with 600 employees in over 50 countries. For many decades DEPRAG engineers have been delivering innovative automation concepts and offer full service solutions for nearly all industries. DEPRAG not only supplies systems integrators with innovative screwdriving- and feeding technology, but also offers comprehensive solutions for automation. A “One Stop Shop” company, which assume full responsibility, is an advantage to any client especially when considering service and maintenance requirements.
DEPRAG SCHULZ GMBH u. CO.
Tel: 09621 371-343
Fax: 09621 371-199
Please pay attention to our legal notice. Some images are copyrighted by third parties. Any use without specifying the source or modification for use in any other purpose is prohibited.