- streamlining your assembly
- optimizing the assembly process
- increase your output
- ergonomic and comfortable to handle by the operator
- simple start-up procedure
For handheld applications, you find in our standard product line equipment, starting with our screw-presenters for the manual pickup of a screw, as well as our feeders that are designed to supply one or two workstations with screws that are automatically presented to handheld screwdrivers.
For the automatic transporting of fasteners, vibratory-, sword (segment)- or Pick-and-Place equipment is available.
Press-Insertion systems for pins or rivets round off our extensive product assortment.
DEPRAG screw feeding systems consist of:
- the feeder
- the handheld screwdriver or press-insertion tool
- a maintenance unit
- an electronic control
The feed-system also contains tooling, such as a nosepiece ball-type or split-type, which is adapted to fit your fastener and application. The feeder also includes the mouthpiece-guide and a set of.
in sizes with 0.15 l and 1.5 l – fill volume
Sword seeders or segment feeders are used when the requirement calls for the gentle and nearly noisless feeding of sensitive fasteners. With our sword feeder equipment, we can process screw sizes from M2 to M6. Such a system is ideal for screws to a length of maximum 25 mm
The complete system, comprising a storage container, material-handling technology, linear conveyor, separator, housing and controller – specially designed for longer screws – offers hassle-free, reliable operation with 24V technology, independent from mains voltage and mains frequency.
If the screw dimensions do not allow feeding through a feedhose, for example where there is an unfavorable relation between screw head diameter and overall length, we can offer special solutions, such as the Pick-and-Place process with vacuum suction or removal by gripper. This process can also be used if there are screw-locations that are difficult to access.
Screw presenters are mainly used for applications where an automatic screwfeeding machine is not cost-effective due to low volume. A screw presenter can process screws with thread-sizes from M1 to M5 and a shaft-length of up to 25 mm. Even screws that cannot be fed through a feedhose, due to unfavorable dimensions, can be processed with a screw-presenter.
We offer an assortment of storage devices that are the ideal addition to our feeding systems. Belt-driven hoppers dramatically increase the required refill intervals. Our hoppers are flexible devices that can be used for different parts – a costly refitting is not necessary.
Pressurization systems consist of coordinated modules: the handheld pressurization device and the automatic feeder for the fasteners, such as rivets, pins and sleeves.
The efficient and process reliable pressurization and placement operations are done by hand.